Fly Onda 30W

Fly Onda 30W is a professional electrical device designed for monitoring and capturing flying insects. It uses the synergistic effect of the adhesive board - impregnated with pheromones - combined with the attraction due to the actinic tubes that emit a special UV light on a certain wavelength, a very attractive light for insects.

Properties & Benefits:
- Material: powder coated white steel, electrostatic field
- Dimensions: 54 x 15 x 33 cm
- Tubes: actinic / quantum 2 x 15 w
- Adhesive boards: 1 pc. inside
- Coverage: 60 sqm on the wall
- Installation : on the wall with dowel and screws
- It's efficient against flies, mosquitoes, flying insects
- Fly Onda 30W is compatible with PRO 30 adhesive board, ONDA 30, COM 45. Adhesive board PRO 30, ONDA 30, COM 45 are purchased separately

Way of usage & Placement:
- Do not use outdoors or in places with dirty environments (excess dust, cereal flour, etc.); At the same time, the product must not come into contact with water through the electrical grille;
- Install near a 220 V AC power supply powered by electricity;
- Install the device at a sufficient height to be protected from personnel and production traffic, but not too high to allow easy monitoring and maintenance (practically about 2m high);
- Install a sufficient number of devices, depending on their protected surface and depending on the configuration of the rooms, avoiding a mounting position that puts the device directly under the action of the sun's rays;
- Avoid having obstacles between the device and the protected area and check the visibility of the light from all points of the protected area;
- Ensure continuous operation (24 hours a day).

Other tips & recommendations:
- Careful! Replacement times may vary depending on operating conditions. A dirty area will adversely affect the replacement period.
- Ideal for companies from the Ho.Re.Ca sector. and private homes.
- The metal surfaces are periodically wiped with a slightly damp cloth to remove any impurities and to keep the device looking good.
- The intervals are set according to the degree of dirt of the area in which the device operates.
- The adhesive board is replaced after 4 weeks , and the actinic tubes are replaced after 12 months of operation.

Please be sure to read, understand, and follow the full Conditions, Disclaimer, and Directions for Use. Use the appropriate personal safety equipment if required and when needed.