Fly Wall 30C

Fly Wall 30C is a professional electro insecticide destined to monitor and capture flying insects. It works by using the synergistic effect of the adhesive board which is impregnated with pheromones, combined with the attraction of the actinic tubes that emit a special UV light on a certain wavelength that make this light attractive to insects.

Properties & Benefits:
- material / colour: steel / white
- tube power: 2 x 15W
- coverage area: 80 sqm
- dimensions: 51.5 x 25 x 7 cm
- installation: on the wall with dowel and screws
- Fly Wall 30B is used with Chameleon adhesive board
- simple fixing procedure

Useful information:
- Install the device near a 220V AC power supply, grounded.
- After establishing the electrical connection, the tubes start to light up and the device is ready for operation.
- Mount the adhesive board in place (remove the protective paper from the adhesive face of the board).
- Allow easy monitoring and maintenance, as well as protection of the device by installing it at about 2 metres high.
- Install a sufficient number of devices, depending on the surface to be protected and depending on the configuration of the rooms, thus avoiding a mounting position that puts the device directly under the action of sunlight.
- Keep obstacles out between the device and the area to be protected, and check the visibility of light from all points of the area.
- Ensure continuous operation of the device (24 hours a day).
- The adhesive plate must replace after 4 weeks.
- The actinic tubes must be replaced after 12 months of operation.
CAREFUL: Replacement times may vary depending on operating conditions - a dirty area will influence the replacement period.

Other tips & recommendations:
- it is preferred to mount it on a white wall to make the most of its reflection
- the device can only be mounted horizontally
- not to be used outdoors or in places with dirty environments (excess dust, cereal flour, etc.)
- avoid contact with water through the electrical grille

Please be sure to read, understand, and follow the full Conditions, Disclaimer, and Directions for Use. Use the appropriate personal safety equipment if required and when needed.