Termidor Foam, 6 x 20 oz

Termidor Foam - 20 oz is a professional termiticide insecticide build for both professional and amateur use. Designed from a new, non-repellent chemical technology treatment, it starts killing termites and ants immediately. It is not a substitute for mechanical alteration, soil or foundation treatment. Termites who contact Termidor Foam transfer it to every other termite they turn in contact with, process called the "Transfer Effect". It has ample time to spread throughout the entire termite population because Termidor is engineered to act slow.
The active ingredient is Fipronil. It is a broad-spectrum insecticide that belongs to the phenylpyrazole chemical family. It disrupts the insect central nervous system by blocking GABA-gated chloride channels and glutamate-gated chloride (GluCl) channels. This causes hyperexcitation of contaminated insects nerves and muscles.

Features:
- Transfer Effect;
- Non-repellent;
- Tasteless;
- Cannot be detected by insects;
- Effective when ingested;
- Slow-acting because it needs to be spread in order to control the invested area;
- Fipronil 0.005% - active ingredient.

This product can be used:
- For the control of: termites (including subterranean, drywood, dampwood and arboreal), wood destroying insects (powder post beetles, old house borer, wharf borer), ants (including: foraging carpenter excluding: fire, harvester, leaf cutter and pharaoh);
- Termidor is ideal for spot treatments in wall voids;
- It is designed for use in and around structures and limited spots treatments: apartments, homes, food/feed handling establishments (non-food/feed areas), restaurants, hospitals and nursing homes (non-patient areas), hotels, motels, hobby greenhouses, interiorscapes, office buildings, schools (do not apply to classrooms when in use), transportation equipment (buses, cargo trucks, trailers, trains), warehouses and other commercial and industrial buildings.

How to use:
- Use only with Whitmire Micro-Gen or BASF approved actuator;
- Remove the outer cap and snap the actuator into place;
- Remove the finger pad cover. After using, replace the finger pad cover;
- When the can is empty, remove the actuator from the can and use it on another can;
- Drilling of holes may be required to access some harborages.

Follow manufacturer's instructions and read the entire Conditions, Disclaimer and Directions for Use.