FlySlim 30S

The FLY SLIM 30S is a professional electro insecticide destined to monitor and capture flying insects. It works by using the synergistic effect of the adhesive board which is impregnated with pheromones, combined with the attraction of the actinic tubes that emit a special UV light on a certain wavelength that make this light attractive to insects.

Properties & Benefits:
- made from stainless steel
- tube power: 2 x 15W
- coverage area: 80 sqm
- it can be installed on the wall with dowels or bolts, suspended, from the ceiling or on the corner in a vertical position
- adhesive boards: 1 pc. adhesive board inside

Useful information:
- Install the device near a 220V AC power supply, grounded.
- After establishing the electrical connection, the tubes start to light up and the device is ready for operation.
- Mount the adhesive board in place (remove the protective paper from the adhesive face of the board).
- Maintain a sufficient height (about 2 metres high) when installing the device so you protect it from personnel and production traffic, and also allow easy monitoring and maintenance.
- Use a sufficient number of devices, according to their protected surface and depending on the configuration of the rooms, thus avoiding a mounting position that puts the device directly under the action of sunlight.
- Eliminate obstacles between the device and the area to be protected, and check the visibility of light from all points of the area.
- Ensure continuous operation of the device (24 hours a day).

Other tips & recommendations:
- even though the product includes the adhesive board, it is recommended to purchase multiple boards to facilitate the continuous use of the UV trap
- it is preferred to mount it on a white wall to make the most of its reflection
- the device can be mounted suspended from the ceiling - horizontally and on the wall - horizontally
- not to be used outdoors or in places with excess dust, cereal flour, etc.
- avoid contact with water through the electrical grille

Please be sure to read, understand, and follow the full Conditions, Disclaimer, and Directions for Use. Use the appropriate personal safety equipment if required and when needed.