5911 P1R, 2 pieces

The 5911 P1R superfilter is a protective filter that can be used in conjunction with filters to purify gas and vapour air. It is compatible with 3M 6000 and 5000 series masks.

Instructions and recommendations issued by the manufacturer:
Replace the filters when:
- they are damaged;
- the airflow to the mask decreases;
- resistance to breathing becomes difficult or unbearable;
- dizziness or other discomforts occur;
- you can smell or taste contaminated or irritated.

Always make sure that the complete equipment is:
- Suitable for application;
- Fixed correctly;
- Worn throughout the exposure;
- Replaced when necessary.

Instructions for use:
- Place the filter in the 501 devices so that its printed face is positioned towards the gas and vapour filter.
- Check that the filter is properly positioned. Its fixing should be sealed and completely cover the front of the gas and vapour filter.
- If you only use the 5000 Series 3M filter, attach the 603 filters to the mask.
- Place the 3M 5000 Series filter on top of the 603 and attach the 501 filters to the 603 platforms.
- Make sure the printed part of the filter is positioned toward the 603 platforms.
- The filters are supplied in pairs and must be attached, used, and replaced together.
- The life of a filter can be influenced by the level of a contaminant, the duration of use, the exposure time, etc.

Please be sure to read, understand, and follow the full Conditions, Disclaimer, and Directions for Use. Use the appropriate personal safety equipment if required and when needed.