Gas Mask Filter P3R-A2B2E1

The combined multi-gas filter type A2B2E1-P3R is designed for use in combination with a full face mask in order to retain fumes, vapours, aerosols and other noxious gases. The filter is used by soldiers, police officers, firefighters, and personnel in any field of activity where toxic substances such as gases, vapours, drops and powders could pose a threat.

Instructions and recommendations issued by the manufacturer:
- The filter should only be used in conditions where the concentration of oxygen in the contaminated air is over 17%;
- The filter should only be used in condition where the concentration of noxious substances does not exceed the concentration specified in the manual;
- The connection to the mask is a standardised threaded connection Rd 40x1/7", according to European standard EN 148-1:2000.

Specifications:
-The combined multi-gas filter type A2B2E1-P3R is sealed at an internal overpressure of 0.15 ± 0.02 bar;
-The breathing limits of the filter are max. 2.6 bar at a continuous flow of 30 l/min and max. 9.8 bar at a continuous flow rate of 95 l/mi;
-The maximum filter penetration has a value of 0.001%, at a flow rate of 95 l/min and an aerosol concentration of 2.5 g/m3.

Please be sure to read, understand, and follow the full Conditions, Disclaimer, and Directions for Use. Use the appropriate personal safety equipment if required and when needed.