TF F 160/150 HD

Part of the new IGEBA product range, the TF 160/150 HD offers 2.5 times more capacity than its younger brother, the TF 160 HD. Equipped with a remote control that eases the handling, the professional unit can also be used successfully with water based solutions. The IGEBA product features a special acid resistant execution option available for aggressive disinfectants and other corrosive chemicals.

Properties and benefits:
- All the parts which come into contact with the chemical products are made of stainless steel or brass, including the fuel tank, the flexible parts being made of teflon;
- The generator is equipped with air filters inside the tank, which act as shock absorbers at the same time;
- Compatible with large-coverage areas;
- Effective in closed spaces.

Technical information:
- The spraying flow rate of the oil based solutions is approximately 120-160 litres/hour.
- In the case of spraying with water, the flow is approximately 80liters/hour at a maximum distance of 80 metres (in closed areas);
- Weight: 120 kg;
- Dimensions: Length 262 cm, Width 80 cm, Height 91 cm.

Instructions or recommendations issued by the manufacturer:
- Even pure water can be applied with 100l / h.;
- Mounted on a lorry, all functions can be done from inside the driver's cab, from starting the motor to releasing the fog.

Please be sure to read, understand, and follow the full Conditions, Disclaimer, and Directions for Use. Use the appropriate personal safety equipment if required and when needed.