FlyFood 30W

The FLY FOOD is a professional electric device designed to quickly monitor and capture flying insects. It uses the synergistic effect of the pheromone-impregnated adhesive board, combined with the attraction due to actinic tubes that emit a special UV light over a certain wavelength, attractive light for insects.

Properties & Benefits:
- It quickly monitors and captures flying insects
- Tubes: actinic / quantum: 2 x 15W
- Material: powder coated white steel, electrostatic field
- Coverage area: 80 sqm on the wall
- Dimensions: 47.5 x 7.5 x 40.5 cm
- Warranty: 2 years
- Compatible with FOOD 30-45 Adhesive Board (FOOD 30-45 Adhesive Board is purchased separately)

Way of usage & Placement:
- Install near a 220V power supply;
- Install the device at a sufficient height to be protected from personnel and production traffic, but not too high to allow easy monitoring and maintenance (practically about 2 meters high);
- Install a sufficient number of devices, depending on the surface to be protected and depending on the configuration of the rooms avoiding avoiding, thus a mounting position that puts the device directly under the action of sunlight;
- Avoid as much as possible the presence of obstacles between the device and the area to be protected, practically checking the visibility of the light from all points of the protected area;
- Ensure continuous operation of the device (24 hours a day).

Other tips & recommendations:
- Do not use outdoors or in places with dirty environments (excess dust, cereal flour, etc.); At the same time, the product must not come into contact with water through the electrical grille;
- The fixing procedure is simple, it is preferred to mount on a white wall to make the most of its reflection;
- The device can be mounted in a horizontal position.

Please be sure to read, understand, and follow the full Conditions, Disclaimer, and Directions for Use. Use the appropriate personal safety equipment if required and when needed.