Victor Electronic M241

The Victor Electronic M241 trap uses innovative technology that produces high-voltage current, eliminating rats quickly and easily.

Simply place the bait in the special compartment, place the trap in the areas where you have observed rodent activity and activate it. Victor Electronic M241 will do the rest!

 With a single set of 4 C batteries, the Victor Electronic M241 trap is capable of eliminating up to 50 rats in a matter of seconds, producing 6,000 volts of electricity for each capture.

The trap is equipped with advanced technology, with an intelligent circuit that detects the presence of the rodent and triggers a high-voltage electrical current as soon as it steps on the electrified plate.

Since rats have the ability to restart their hearts after an electric shock, the Victor Electronic M241 traps apply electrical shocks for 2 minutes to ensure higher rates of rodent elimination.

After making a catch, the green light above the power switch will light up to indicate a catch. The LED will light up on each capture and will blink for up to 7 days to indicate the removal of the intruders.

When the trap is full, slide the collection compartment and remove the rodents. The collection chamber is removable so it can easily be cleaned between uses. The new and improved design of the electronic trap allows them to be easily removed without having to see or touch the rodents.

The trap does not use chemicals and can be used anywhere inside the home. 

Victor Electronic M241 features a safety switch that automatically deactivates the trap whenever the door of the bait chamber opens.

Advantages of the Victor Electronic M241 trap:

- Eliminates rats quickly and easily, using a high-voltage current of 6000 volts; 

- It is very efficient - removes up to 50 rats, (per 4C battery pack), no chemicals or poisons;

- The bait compartment indicates the location and amount of bait required;

- Improved design: easy to place bait, easy to use and easy to clean;

- Extremely economical - the trap is reusable and can be used successfully over many years.

Instructions for use:

1. Set the switch to "OFF" and insert 4 C batteries into the battery compartment. Batteries are not included! 

2. Apply bait in the special compartment. Use a protein-rich bait, such as peanut butter, peanut or chocolate, taking care to apply only to the indicated bait cup. Do not use too much. Rodents have a sense of smell developed, requiring only a small amount of bait to attract them to the trap.

Use a cotton swab, a toothpick, a tweezer or a similar tool to place the bait so that the odor is not transferred to the trap.

3. Activate the trap. There will be a green light that will blink when the trap is operating properly. The LED will light up on each capture and will blink for up to 7 days to indicate the removal of the intruders.

Red light indicates a low battery life. Change the batteries. Using old batteries can cause the trap not to work. Use a new set of fully charged batteries and check that the positive and negative battery heads are aligned correctly. 

4. Place the trap in areas heavily circulated by rodents or along the wall where they circulate. The trap must be placed longitudinally on the wall, with the inlet near the wall.

5. To eliminate the catches, set the switch to the "OFF" position, open the trap holding the base in the left hand and slide up with the right hand (Figure 5).

Clean the trap after each use for effective results. Remove the batteries and clean the trap using a soft brush and warm soapy water. Allow the trap to dry completely before reuse.

6. Reassemble the trap. Hold the base of the trap with your left hand and slide into position by pushing forward with your right hand.

The Victor Electronic M241 trap offers a 100% combat rate and can be used over several years, providing complete and effective rodent control treatment in a very short time.