Elite Line

Elite Line (300 or 400) features:
This product has a Lombardini, 4 stroke diesel engine with 2, 3 or 4 cylinders and different output: 17 hp, 27.2 hp, 35.2 hp, 51 hp and 63.9 hp turbo; 3600 r.p.m. but silent, also it is water cooled and has an electric start. The fuel tank has a capacity of 25 liters for ELITE 300 and 45 liters for ELITE 400 with a level gauge, warning light and hours meter on the control unit for knowing when the device is not working properly.

Another important part of the device is the pump. The Comet APS 51 with reduction gear and a flow rate of 51 liters/min is designed for appliances with engine from 35,2 hp to 63.9 hp turbo. Comet APS 41 pump with reduction gear and a flow rate of 40 liters/min can be used for machines with less powerfull engines, from 17 hp to 27,2 hp. Both pumps have some similarities: 3 Viton diaphragms, can whitstand a max pressure of 40 bar and pressure regulation valves with self cleaning filter in antiacid brass and a Glycerin pressure gauge that can messure up to 80 bar.

The unit is strenghten by its galvanized steel frame which plays the support role for the engine pump and helps to an easier loading and unloading of the device.
Another important component of Elite Line is the integrated main tank with a capacity of 300/400 liters, made of polyethylene, with inside smooth walls and bottom and it has a central convergence point that helps its complete draining. It is equipped with an electronic level gauge only visible by led and a screw hatch cap and sieve filter. Another tank integrated in the main unit is the circuit washing tank. It is made of polyethilene, it has 30 liters and has integrated the hand washing tank which is independent of it, with a 18 litres capacity and polyethylene material also.

The engine-pump case of the unit is rugged and handy, in reinforced fiber glass and has a compass opening.
The ventilating unit of the centrifugal turbine with omni-orientable Flexible Gun Head M30, has a mobility of 280° in horizontal direction by means of a ball bearing and 250° in vertical direction by means of a remote control unit to be located inside the vehicle cab. The ventilating unit is made of the same material as the other components: polyethylene HDPE (until 35,2hp) and connections zinc plated and painted green ST, with only 5 decibel of noise.

N.3- 4-5(according to engine) are adjustable spraying brass nozzles, with dual delivery, outside the airflow, with ant drop valve and closing position that leaves out the unnecessary nozzles, Viton gasket.
The actual range of the unit is: 17 HP = 18-20 m.; 27,2 HP = 25- 28 m.; 35,2 HP 30-35 m.; 51 HP = 35-40 m; 63.9 HP= 40-45 m.

The product has some safety functions in case of undesired events:
- Safety system for stopping the engine if air filter closes;
- Safety system for stopping the engine in case of low level of water;
- Safety system for stopping the engine in case of low level of oil;
- Revolving head light for night-work;
- Push-bottom of emergency stop.

Size: 130 x 125 (165) x 130 (150) cm;

Weight : from 300 to 570 Kg.