FlyFood 30W

The FLY FOOD electrical device is designed to quickly monitor and capture flying insects, using the synergistic effect of the pheromone-impregnated adhesive board, combined with the attraction due to actinic tubes that emit a special UV light over a certain wavelength, attractive light for insects.

Way of usage:
-The device can be mounted in a horizontal position.
-The fixing procedure is simple, it is preferred to mount on a white wall to make the most of its reflection.
-To obtain optimal results, follow the instructions below:
-Do not use outdoors or in locations with dirty environments (excess dust, cereal flour, etc.);
-Installed near a 220V power supply;
-Install the device at a height high enough to be protected from personnel and production traffic, but not too high to allow easy monitoring and maintenance (practically about 2 meters high);
-Install a sufficient number of devices, depending on the surface to be protected and depending on the configuration of the rooms avoiding avoiding, thus a mounting position that puts the device directly under the action of sunlight;
-Avoid as much as possible the presence of obstacles between the device and the area to be protected, practically checking the visibility of light from all points of the protected area;
-Ensure continuous operation of the device (24 hours a day).

Technical specifications:
-Material: powder coated white steel, in electrostatic field
-Tubes: actinic / quantum 2 x 15 W
-Adhesive boards: 1 pc. inside
-Coverage: 80 sqm on the wall
-Dimensions: 47.5 x 7.5 x 40.5 cm

Installation:
On the wall with dowel and screws

Target:
flies, mosquitoes, flying insects

Use:
For companies in the food sector

FlyFood 30W can be used together with FOOD 30-45 Adhesive Board.

FOOD 30-45 adhesive board is purchased separately.