Fly Onda 30W

Fly Onda 30W is an electrical device with adhesive board for monitoring and capturing flying insects. It uses the synergistic effect of the adhesive board - impregnated with pheromones - combined with the attraction due to the actinic tubes that emit a special UV light on a certain wavelength, a very attractive light for insects.

Way of usage:
-The device can be mounted in various positions horizontally or vertically.
-The fixing procedure is simple, it is preferred to mount on a white wall to make the most of its reflection.
-Remove the protective paper from the adhesive face of the board and place the adhesive board in the device.
-To connect the device, a single-phase 220 V AC socket is required, provided with the earth connection.
-After establishing the electrical connection, the tubes start to light up and the device is ready for operation.

To obtain optimal results, follow the instructions below:
-Do not use outdoors or in locations with dirty environments (excess dust, cereal flour, etc.);
-Install near a 220 V AC power supply;
-Powered by electricity;
-Install the device at a sufficient height to be protected from personnel and production traffic, but not too high to allow easy monitoring and maintenance (practically about 2m high);
-Install a sufficient number of devices, depending on their protected surface and depending on the configuration of the rooms, avoiding a mounting position that puts the device directly under the action of the sun's rays;
-Avoid as much as possible the presence of obstacles between the device and the protected area, checking practically the visibility of the light from all points of the protected area;
-Ensure continuous operation (24 hours a day).
-The metal surfaces are periodically wiped with a slightly damp cloth to remove any deposited impurities and to keep the pleasant appearance of the device.
-The intervals are established according to the degree of dirt of the area in which the device works.
-The adhesive plate is replaced after 4 weeks, and the actinic tubes are replaced after 12 months of operation.
-Careful! Replacement times may change depending on operating conditions. A dirty area will negatively affect the replacement period.

Important notes:
-Material: powder coated white steel, in electrostatic field
-Dimensions: 54 x 15 x 33 cm
-Tubes: actinic / quantum 2 x 15 w
-Adhesive boards: 1 pc. inside
-Coverage: 60 sqm on the wall

Installation:
On the wall with dowel and screws

Target:
flies, mosquitoes, flying insects

Use:
Companies from the Ho.Re.Ca sector. and civilian housing

Fly Onda 30W electroinsecticide can be used together with PRO 30, ONDA 30, COM 45 adhesive board.

The adhesive board PRO 30, ONDA 30, COM 45 is purchased separately.