Fusilade Forte EC, 1 liter

GENERAL INSTRUCTIONS

FUSILADE FORTE is rapidly absorbed by leaves and green stems and translocated throughout the plant. It accumulates at growing points, both above ground and in the roots, rhizomes and stolons of grass weeds. Weed growth and hence competition with the crop stops within 48 hours. First symptoms are not evident for at least a week after application. Growing points turn brown and rot, shoot tips can be easily pulled out after 2 to 3 weeks. Young leaves turn yellow or redden soon after, but more mature leaves may remain green for extended periods. Weed control is usually complete 3 to 5 weeks after spraying. If treated area is to be grazed following application with this product, allow 7 days to elapse before introducing stock to ensure maximum weed control.

Mixing

Add the required amount of product directly to the spray tank which should be 50 to 75% full. The agitation system should be running during mixing and spraying. If agitation ceases and settlement occurs, agitate thoroughly before spraying. The addition of an adjuvant is not necessary. 

Time of Application

To obtain the maximum benefits of this product, weeds should be sprayed when young and actively growing. Grasses establishing from seed should be sprayed before tillering occurs. Higher rates will be necessary once tillering commences. For annual grass weeds, spraying must take place before the late tillering stage if a complete kill is desired. Application may be made at any stage of crop growth but allowing sufficient time for the prescribed withholding period.

Method of Application

Good spray coverage is essential for maximum results. Spray equipment must be checked and calibrated accurately prior to application.

Boom spraying

Check height of boom above the target weeds to ensure the spray is evenly distributed and a double overlap pattern is obtained. When spraying grass weed targets, an even distribution of droplets with no less than 50% of the spray volume in the 150 to 300 micron range is desirable. Broadacre use: Water volumes per hectare will depend on nozzle selection and should be in the range of 50 to 100 L/ha. 110˚ fan nozzles are preferred for use with this product. Use higher volumes of spray to achieve full coverage of dense, vigorous weed infestations.

Band spraying: Ensure sufficient coverage by using 2 nozzles (one either side of the plant row) when the crop is beyond the 2 leaf stage.

Aerial Application

Flying height, pressure, nozzle size and positioning of the aircraft should be such to minimise spray drift. Avoid spraying in high winds or under temperature inversion conditions. Special care must be taken to avoid drift onto adjacent crops such as cereals, maize or sorghum. Apply in not less than 30 L/ha. Spot Spraying On smaller areas use a knapsack sprayer suitably calibrated. Cleaning Up

After use, clean equipment thoroughly and rinse several times prior to re-use.